What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 29.06.2025 00:05
These devices are installed between the “hot” and “neutral” and protective ground.
nine
First Sentence:
It seems Mohan does not understand the difference between a comment and an Answer.
so, what happens?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The man who refused to die, and came back from his death 6 times - Times of India
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are two important concepts here.
Report: Contract dispute leads to WR Terry McLaurin skipping Commanders minicamp - PhillyVoice
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Barnstars:
What to watch for in today’s NASCAR Cup race at Michigan International Speedway - NBC Sports
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
For this case there are devices called Metal oxide varistors (MOV).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
NASA Spots Strange Towering Shape Breaking Through Mars’ Atmosphere - The Daily Galaxy
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes the function of a fuse.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–10[John johnson John Johnson ]
The other is “what does a “fuse” do?”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
but this device (an Inductor) … impedes the rapid changes in the current.
In schematic diagrams this is the symbol for a fuse:
Flipping two atoms in LSD turned it into a powerful treatment for damaged brain circuits - PsyPost
[image of Common-mode choke]
what exactly is a ‘surge’ protector?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–16 [ OO OLAOYE OYEBODE ]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Because the load is inductive, the current lags the voltage.(by a bit).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
An AC voltage/ current source, and an ac inductive load.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What does a fuse do?
[old diagram got deleted by accident]
This is 'the assistant's answer'
I post the exact comment here.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
a photo is worth a thousand words.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A fuse is a non-resetable over current circuit protector.
(Dc diagram shown, AC is similar).
A circuit breaker is similar, but is resettable.
This device then solves the entire problem.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This one hit behind the barn.
Upvotes:
The third is lightning and “how it gets conducted into a home.”
Now when you have a certain ac resistance, then a current flows in a loop.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
but I think this circuit , shows a few more pieces.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
the problem then depends on "how fast does the fuse operate?".
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then asserts :
eight
The bolt then partially travels down the line to your home.
He then describes Rainy Season and Lightning.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
One
Edit 2024–10.
This is where this question deviates from being a 'generic' question, and becomes more specific.
These are simplified answers to the original question, and does not change anything I wrote above.
The MOV will conduct when the voltage exceeds 50% of line voltage.
There are three different concepts here that are getting confused.
At least they know the answer if they wanted it.
But it can get overloaded, and no longer works.
At one ohm, the resistor has a maximum of 1 watt power.
What is lightning?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It also is a device that limits the change in current flow.